Digital Counters Selec XC200 Counters

Digital Counters Selec XC200 Counters

Selec Make XC200NX (72 x 72) Counter- High functionality, Low Cost Counter

 

The Selec XC200NX / XC1200 is a 6 digit Counter with push wheel setting suitable for counting operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has following operating modes on-delay, Interval delay, auto reset, time pulse repeat. Accepts input from - Proximity switches, Encoders, Potential free contacts with optional 10 years memory retention , with input speed from 0 to 5 KHZ and 9999 counts and 4.00 RPM/RPH to 99999 RPM/RPH and to operate two independent relay output contacts with two set point which are isolated from the supply voltage. These counters are housed in a compact panel mounting enclosure and are powered from 85 to 270 Vac/dc.

 

  FEATURES

 

Ø   Sensor type : NPN

Ø   Input Speed :

Ø   0 to 30Hz / 0 to 2.5kHz / 0 to 5kHz*

Ø   (*for up and down modes only)

Ø   Output : 2 C/O (DPDT)

Ø   Direction : Up, Down, Bidirectional, Quadrature

Ø   Programmable scale factor

Ø   Range : Count : 0.0001 to 999999

   Rate : 4.00 to 99999 rpm/rph

Ø   Reset : Front, Remote

           


We are specialized in building PLC Control Panels and we deal with SELEC Products - PLCs, Digital Electrical Panel Meters,PID Temperature Controllers,Timers,Counters,Process Indicators,Protection Relays. We will Assist you in Programming, Installation and Commissioning of PLC’s , SCADA, Touch Screen HMI’s etc., We are also Deal with SMPS,Relay Board ,Proximity Sensors, Photoelectric Sensor, Push Button, Indicator Lights, Encoders ,Pressure Sensors, Thermocouple Sensor(NABL Calibration), RTD Sensor, Contactors, MCB's, MCCB's, Wires

For a Free Quote and for datasheets mail us at sales@selectautomations.net

 

Visit us at www.selectautomations.net


Selec  XC200NX (72 x 72) , XC1200 (48 x 96) , High functionality, Low Cost,LED Counters(www.selectautomations.net)

The Selec XC200NX / XC1200 is a 6 digit Counter with push wheel setting suitable for counting operation of equipment, machinery, systems or processes in a wide range of industrial applications. It has following operating modes on-delay, Interval delay, auto reset, time pulse repeat. Accepts input from - Proximity switches, Encoders, Potential free contacts with optional 10 years memory retention , with input speed from 0 to 5 KHZ and 9999 counts and 4.00 RPM/RPH to 99999 RPM/RPH and to operate two independent relay output contacts with two set point which are isolated from the supply voltage. These counters are housed in a compact panel mounting enclosure and are powered from 85 to 270 Vac/dc

0 comments:

Post a Comment