SELECT AUTOMATIONS

Selec Make PID Controllers - PID500 (48x48) | Full Featured PID Controller

 

The Selec PID500 temperature controllers or on/off controller are advanced, 4 digit auto-tuning controllers with up to 3 outputs which are designed for control of temperature or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal. Versions are available with relay, SSR or analogue outputs which can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) and 1 alarm output. The temperature controllers are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270VAC.

 

FEATURES

 

 

Ø   Auto tune PID
Input : J, K, T, R, S, C, E, B, N, L, U, W,B, Platinel II
           RTD (2 wire / 3 wire): PT100, Linear mV: -5 to 56mV, Current: 0 / 4 to 20 mA, Voltage: 0 to 10V DC

Ø   Max 3 output

Ø   Output 2 programmable as Heat / Cool / Alarm

Ø   Output 3 programmable as an alarm

Ø   Selectable lower display option

Ø   Selectable temperature unit - °C / °F

Ø   Auto / Manual mode

Ø   4 Zone PID

Ø   Heat-Cool PID algorithm

Ø   Ramp-Soak

Ø   Soft Start (set point ramping for process startup)

Ø   85 to 270V AC/DC supply voltage(24V AC/DC optional)

 

 

OPTIONAL

Ø   18V DC output to drive SSR

Ø   Linear DC outputs (0 to 10 V, 0 to 20mA, 4 to 20 mA)

Ø   Heater Current Monitor and Heater Break Alarm

Ø   Remote set point input (4 to 20 mA / 0 to 10V)

Ø   Motorized input (with position feedback)

Ø   RS485 communication

Ø   Retransmission output

 

We are specialized in building PLC Control Panels and we deal with SELEC Products - PLCs, Digital Electrical Panel Meters,PID Temperature Controllers,Timers,Counters,Process Indicators,Protection Relays. We will Assist you in Programming, Installation and Commissioning of PLC’s , SCADA, Touch Screen HMI’s etc., We are also Deal with SMPS,Relay Board ,Proximity Sensors, Photoelectric Sensor, Push Button, Indicator Lights, Encoders ,Pressure Sensors, Thermocouple Sensor(NABL Calibration), RTD Sensor, Contactors, MCB's, MCCB's, Wires

 

For a Free Quote and for datasheets mail us at sales@selectautomations.net

 

Visit us at www.selectautomations.net

 

The Selec PID500 temperature controllers or on/off controller are advanced, 4 digit auto-tuning controllers with up to 3 outputs which are designed for control of temperature or processes in a wide range of industrial applications. The controllers operate from a range of thermocouple or 2/3 wire PT100 (RTD) input sensors, or from a millivolt, 0-5Vdc, 0-10Vdc or 0/4-20mA process signal. Versions are available with relay, SSR or analogue outputs which can be configured as 1 on/off or PID control and up to 2 alarm outputs, or as 2 on/off or PID controls (heat/cool) and 1 alarm output. The temperature controllers are housed in a compact square enclosure which panel mounts, and are auxiliary powered from either 24Vac/dc or 85 to 270VAC